PC/ABS Filament

Description

Filament available in the new spool system. Compatible with BambuLab AMS.

Fiberlogy PC/ABS is an advanced 3D printing filament designed for the most demanding projects. The combination of polycarbonate (PC) with acrylonitrile-butadiene-styrene (ABS) has resulted in a material that stands out for its excellent mechanical and thermal properties, while also being easier to print than pure polycarbonate.

Thanks to its unique blend of components, PC/ABS is characterized by very high impact strength, especially at low temperatures. Prints made from this material retain their integrity even under harsh conditions, and the HDT (heat deflection temperature) reaches 110°C.

The filament provides excellent layer adhesion, which minimizes the risk of cracking and delamination. This makes it possible to create large and complex parts without worrying about a loss of quality.

PC/ABS is resistant to acids, bases, and salts, allowing it to be used in environments exposed to aggressive substances.

Technical Data

Printing Parameters

  • Printing temperature: 260–280°C
  • Bed temperature: 100°C
  • Bed material: Smooth PEI + adhesive; Textured PEI; Glass + adhesive
  • Curing conditions: 70°C / 4 hours
  • Enclosed chamber: recommended
  • Airflow: 0–25%

Technical Specifications

  • Density: 1.07 g/cm³
  • Charpy impact strength (notched) @ 23°C: 53 kJ/m² (ISO 179)
  • Vicat softening temperature: 114°C (ISO 306)
  • Tensile strength at yield: 42 MPa (ISO 527)
  • Tensile modulus: 2000 MPa (ISO 527)
  • Izod impact strength (notched) @ 23°C: 55 kJ/m² (ISO 180)
  • Flexural strength: 68 MPa (ISO 178)
  • Flexural modulus: 2000 MPa (ISO 178)
  • Elongation at break: 7% (ISO 527)